Description
Dini Argeo STFC Tension Load Cell
Main Features
- C3 Precision Class
- Nickel Plated Steel Construction
- IP67 Protection Level
- Maximum Capacities from 2000kg to 10000kg
- Shielded Connection Cable
- Test Certificate Available on Request
Technical Features
- Minimum load cell verification interval: Vmin = EMax / 10.000
- Maximum number of verification intervals: nLC = 3000
- Combined error: 0,02% of Full Scale Output (F.S.)
- Full Scale Output: 2mV/V +/- 0,1%
- Temperature effect on zero: 0,0013% /°C
- Temperature effect on full scale output: 0,0014% /°C
- Compensated Temperature Range: –10°C/+40°C
- Operating Temperature Range: -20°C/+60°C
- Creep error after 4 hours: 0,03% F.S.
- Maximum tolerated excitation voltage: 10 VDC
- Input Resistance: 1100 Ohm
- Output Resistance: 1000 Ohm
- Zero balance: +/-1% F.S.
- Insulation Resistance: >5000 MOhm
- Safe Overload: 150% F.S.
- Ultimate Overload: 300% F.S.
- 4-wire shielded cable, 5m long, 5mm diameter
Please click here for the STFC load cell datasheet …..
Please click here for the STFC technical drawing …..
Dini Argeo DFWLB Display
Main Features
- Peak Hold – the display will lock on to the greatest amount of force applied to the load cell
- 5-key functional waterproof keypad.
- Back-lit 25mm LCD display with 6 high contrast digits with icons for showing the active functions.
- Easy to clean ABS IP68 case, resistant to harsh and corrosive environments.
- Suitable for use on the table, column, or wall.
- Fitted with fixing bracket with adjustable inclination.
- A/D 24 bit, 4 channel converter, max. 200 conv./sec. auto-select, and up to 8 signal linearization points.
- Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/e in CE-M approved versions for legal for trade use.
- Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
- Connection with up to 8 load cells with input resistance equal to 350 Ohm or up to 16 cells of 700 Ohm each.
- Digital calibration and Set-Up from keypad or from PC through DINITOOLS.
- Power supply through built-in rechargeable battery, with 60h operating time, and fitted with external battery charger (to not use as power adaptor).
Selectable Function Modes
- The user can select the operating modes directly using the dedicated key*:
– High resolution display x 10
– Precision weighing with temporary recalibration via a sample weight (for internal factory use)
– Net/Gross
– Lb to Kg converter
– Free conversion factor (for meter and litre counters etc.)
– Weight totalizer
– Formulizer
– +/- controller with quick target and threshold input
– Percentage weighing
– Piece counter
– Hold
The “alibi memory” function is available in combination with the required operating mode and it is activated automatically when installing the relevant optional board.
- Optional functions:
– PEAK, detection of weight peaks (code DFWPK)
– Newton to Kg converter (code DFWPK) - Access to the user menu is gained using the dedicated key* to adjust the weighing filter, date and time, setpoint and tare weight, which the user can access by entering a programmable access password.* These quick access keys to the menus can be blocked by configuring a dedicated password.
Main Certifications
- EU Type Examination Certificate (45501:2015)
- OIML R76
I/O Section
- RS232/C bidirectional port on RJ11 connector for quick connection (optional RS485) on screw terminal, configurable for PC, PLC, or additional remote display.
- RS232/C bidirectional port configurable for connection to printer or labeller.
Please click here for the DFWLB display datasheet …..
