Description
- PROFIBUS CONVERTER FOR INDIVIDUAL WEIGHING SCALE
This PROFIBUS converter, connected to an individual digital scale or to a selected one from a scales network, transmit the following controls and data by PROFIBUS protocol:
– NET ,GROSS and TARE weight
– Weight status (for example; positive, negative, stable, unstable)
– Error conditions (es. overload, underload)
– Aliby Memory
– Calibration
– Configuration SETUP)
– DIGITAL INPUT status
– RELAY OUTPUT status
– SETPOINT output writings - HUB PROFIBUS FUNCTION, UP TO 16 WEIGHING SCALES
This set up permits the simultaneous check of all the weighing scales network data by PROFIBUS protocol.
In detail:
– NET weight and GROSS weight of the scales
– Weight status (for example, positive, negative, stable, unstable)
– Error condition (es. overload, underload)
– DIGITAL INPUT status
– RELAY OUTPUT status - TECHNICAL FEATURES OF PROFIBUS CONVERTER
PROFIBUS-DP slave (IEC 61158).
ABS case for panel mounting on DIN bar.
Suitable to function with DGT1S weight transmitter. Quick configuration from the transmitter programming menu.
RS485 interface on RJ45 connector for quick connection to DGT1S.
Profibus port on 9 Pin connector.
Board optoisolation against electric or electrostatic discharges.
Indexing from 0 to 98.
Automatic Baud Rate selection from 9600 bit/s to 12Mbit/s.
Power source: from 12 to 24Vdc.
Please click here for the PROFIBUS Interface for Single Weighing Scale or Scales Network Datasheet…
