ATEX SPN Series Single Point Load Cell

Description

Main Features

• C3 Precision Class
• OFF Centre Load Compensated
• Constructed from Aluminium alloy
• IP65 Protection
• Maximum Capacities from 100kg x 630kg
• For Platforms with Dimensions up to 700mm x 700mm
• Shielded Connection Cable
• OIML Certification Available on Request
• Test Certificate Available on Request

Technical Features

• Minimum load cell verification interval: Vmin = EMax / 10.000-15.000
• Maximum number of verification intervals: nLC = 3000
• Sensitivity: 2mV/V ± 10%
• Temperature effect on zero:
  from ±0,0093% F.S./10K to ±0,0140%
• Temperature effect on Full Span:
  0,0117% F.S./10K (-10°C/+20°C)
  0,0175% F.S./10K (+20°C/+40°C)
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -10°C/+50°C
• Creep at nominal load in 30 minutes: 0,01% F.S.
• Maximum excitation voltage without damage: 15 Vdc
• Input Resistance: 300..500 Ohm
• Output Resistance: 300..500 Ohm
• Insulation Resistance: >2000 MOhm
• Mechanical limit load in service: 150% F.S.
• Destructive load: 300% F.S.
• Deflection at nominal load: <0,5mm
• 6-wire shielded cable, 3m long, 5mm diameter

ATEX Version

• The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
  ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
  ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
• The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
  IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.