Silo Load Cell Weighing System for 3 Leg Silo’s – DGT20I IP68‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎

From: £2,255.00

A complete weighing system kit for tanks, silos, and vessels with three legs.  Coventry Scale supply a complete weighing solution for your silo, all our weighing systems are supplied pre-calibrated ready for your engineer to install.  Once the load cells with mounting modules have been installed, instructions will be supplied to offset the weight of the empty tank or silo without altering the calibration of the system.

Each silo weighing kit consists of the following components

  • 3x CPX Compression Load Cells
  • 3x KCPN10 Mounting Modules
  • 1x DGT20I Weight Indicator
  • 1x JB4 Junction Box
  • 10 Meters of Screened Load Cell Cable
  • 1x Calibration Test Certificate

Please use the drop boxes below to choose your maximum weighing capacity (to include empty silo weight), the version of DGT20I display, and display mounting option.

Description

A comprehensive silo load cell weighing system with three compression load cells, specifically designed for tanks, silos, and vessels.

Coventry Scale supply a pre-calibrated, complete weighing solution for your silo. On delivery, the system is fully ready for installation by your engineer.

Following the installation of the load cells with mounting modules, instructions are provided to enable you to offset the weight of the empty tank or silo without altering the calibration of the system.

DGT20I Display

Multipurpose stainless steel weight indicator ideal for tanks, silos, vessels, dosage, filling systems etc.

AISI 304 stainless steel multifunction case that guarantees an IP68 degree of protection both on bench and panel installations. Suitable for heavy industrial applications, for dosage, filling and level control systems.  Supplied with 2 inputs and 2 outputs as standard, analog output also available.

DGT20I Available Versions

  • DGT20I-1 External 12V Power Supply
  • DGT20IPW 110V/230Vac
  • DGT20IAN-1 Analog Output

DGT20I Datasheet


CPX Compression Load Cells

CPX IP68 stainless steel compression load cells for weighing tanks, silos and hoppers when used with KCPN mounting modules. CPX load cells are supplied with 5 meters of cable as standard.

CPX Load Cell Datasheet
CPX Load Cell Technical Drawing (250kg to 12500kg)


KCPN Mounting Module

Mounting kits for CPX compression load cells.  Suitable for vessels, silos, tanks, and hoppers.

  • AISI304 Stainless Steel Construction
  • Great Resistance to Lateral Forces
  • Locking Nut to Raise or Lower Module Height
  • Easy Installation
  • Overload Protection Locking Nut
  • Self-Centring Connection Segment Between Lower and Upper Plates

KCPN10 Datasheet
KCPN10 Technical drawing


JB4 IP67 Junction Box

Simple junction box with IP67 protection and 4 inputs equipped with electronic board for junction of the signals of 2, 3 or 4 load cells. Screw terminal boards to facilitate the connection. The protection circuit protects against lightning and overvoltage. The JB4 junction box is an ideal choice for static weighing systems such as silos, tanks, vessels and big containers.

JB4 Datasheet

Please contact us for more information on our silo load cell weighing system.

Additional information

Weight 50 kg
Maximum Capacity

1500kg x 0.5kg – 3x CPX500 Load Cells, 3000kg x 1kg – 3x CPX1000 Load Cells, 7500kg x 2kg – 3x CPX2500 Load Cells, 15,000kg x 5kg – 3x CPX5000 Load Cells, 22500kg x 10kg – 3x CPX7500 Load Cells, 30,000kg x 10kg – 3x CPX10000 Load Cells, 37500kg x 20kg – 3x CPX12500 Load Cells

DGT20I Version

DGT20I-1 External 12V Power Supply, DGT20IPW 110V/230Vac, DGT20IAN-1 Analog Output

Wall or Panel Mounted

Wall Mounted, Panel Mounted